Prepare the paint
Wash, decontaminate and correct defects if needed. Remove polishing oils and let the surface dry.

Water beads on the coated surface, helping dirt rinse away during routine washing.
Water-beading illustration
PRO 10H adds gloss to a well-prepared finish. Correct existing paint defects before coating if needed.
Gloss illustration
Wash and prepare the surface first. Prep products are sold separately.

Cool paint, good lighting and one small section at a time.
Wash, decontaminate and correct defects if needed. Remove polishing oils and let the surface dry.
Use the applicator to spread the coating evenly over a small section.
Follow the supplied flash time. Wipe away excess with the towel and check from different angles.
Keep the vehicle dry for 24 hours after the final coat, and wait 7 days before washing.
Adding a second layer? Allow 2–4 hours between coats. Coating does not remove scratches or replace paint correction.

Each kit contains a 50 mL bottle and application accessories. Choose additional kits for multiple vehicles or projects. The amount required depends on the surfaces, vehicle size and number of layers.
Yes, with thorough preparation, good lighting and time to work in small sections. Read the supplied instructions first and plan a dry curing period.
No. Inspect and correct paint defects before coating if needed. Ceramic coating does not make paint scratch-proof or prevent impact damage.
The surface must be clean and free of polishing oils or residue. Prep Spray is an optional add-on and does not replace washing or decontamination.
Follow the application instructions and test an inconspicuous area first. For an unfamiliar finish or material, ask our product support team before application.
Great shine, but be patient with application for best results.
Easy to apply and the gloss is incredible. Highly recommend!
Amazing shine! My car looks like new, and water just slides off.
This is a top-notch product! The Ceramic Coating Pro 10H has given my car a beautiful, glassy finish that stands out. It’s been a month, and the shine hasn’t faded at all. The water-repellent effect works as advertised, and washing my car is much easier. Application was easy, and the results are visible immediately. Highly recommend this product for anyone who loves their car!
Perfect for keeping my car looking clean and shiny! The coating adds a beautiful gloss, and water just rolls right off. I applied it a month ago, and it’s held up well, even after rain and dirt exposure. Application was straightforward, and the results are immediate. This is the best ceramic coating I’ve tried so far.
This coating is excellent! My car’s paint looks incredible, with a high-gloss finish that lasts. The water-repellent effect is fantastic, and it’s been a game-changer for keeping my car looking clean. Application was easy—just spray, wipe, and buff—and the coating has held up perfectly over the last few weeks. Couldn’t be happier with the results.
This 10H ceramic coating exceeded my expectations! My car’s paint looks flawless, with a deep gloss that hasn’t faded. I’ve driven through rain, and the coating keeps the water beading up and sliding off. It was easy to apply, though I’d recommend taking your time to ensure an even layer. It’s been about a month, and I’m thrilled with the results. Highly recommend!
I’ve tried a lot of ceramic coatings, but this one with 10H hardness is by far the best. My car looks stunning, with a rich, glossy finish that turns heads. Water and dirt don’t stick, making cleaning so much easier. Application was simple, and it dried to a beautiful, streak-free finish. It’s been a few weeks, and my car still looks freshly detailed. Highly recommend!
Love this product! My car looks fantastic, with a deep, mirror-like shine. The hydrophobic effect is amazing—water and mud just don’t stick. I applied it to the entire exterior, and it’s made a noticeable difference. Application was easy, and the coating is holding up beautifully even after multiple washes. Highly recommend for anyone who takes pride in their car’s appearance!
Outstanding coating! My car’s paint has never looked better. The water-beading effect is incredible, and my car stays cleaner for longer. Application was straightforward, and the product dried to a beautiful, streak-free finish. I’ve had it on for a couple of months, and the coating is still going strong. Perfect for anyone looking to protect their car and reduce maintenance.
Wash away everyday dirt and road film before drying the car or moving on to the preparation steps it needs.

Three practical benefits for weekly maintenance and pre-coating preparation.

A balanced formula cleans without aggressively stripping waxes, sealants, or ceramic protection.

Graphene and SiO₂ help the surface feel slicker and look freshly detailed after rinsing and drying.

Dense foam, easy rinsing, and a clean finish reduce the need for extra gloss products after every wash.

Use on a cool surface out of direct sunlight. Never allow shampoo to dry on the vehicle.

On properly maintained paint, the wash removes traffic film and residue that mute reflections. The result is a cleaner, slicker surface with more visible colour depth.
The pH-neutral formula is designed for coating-safe maintenance. Follow the dilution and washing directions on the label.
Yes. It works in a foam cannon or a traditional wash bucket. Adjust the dilution to your equipment and the level of soil.
No. It is a maintenance shampoo that supports gloss and hydrophobic performance; it does not replace a bonded ceramic coating.
Yes. It can be used on clear-coated paint, waxes, sealants, glass, wheels, and exterior trim.
Use a dedicated tar remover or iron remover for heavy bonded contamination, then wash the vehicle normally.
Select your quantity above and check out securely with free U.S. shipping.
Remove leftover polishing oils and residue, then inspect the surface before coating. This is the final wipe after the preparation work.

Spread with a clean microfiber, finish with a dry towel and inspect the panel. No rinse is needed afterward.


Clears lubricants and fillers left after paint correction so the true finish is exposed.
Removes lingering protection that can prevent a new coating from meeting the paint evenly.
Lifts light handling residue and oily film before the coating applicator touches the panel.

Work in the shade on a cool, dry surface. Use clean towels and change sides often.
Each step has a different job. Prep Spray is the final cleaning stage immediately before protection.
Dissolve embedded metallic fallout and brake-dust contamination.
Shop Iron Remover →Lift bonded surface contamination that washing and chemistry leave behind.
Shop Clay Bar Kit →Remove oils, wax residue, and final surface film before coating.
Choose a bonded ceramic coating or an easy-to-use graphene spray coating.
Shop Graphene Coating →Follow the product label. Work with ventilation, keep the bottle away from heat and flame, and test an inconspicuous area when you are unsure about a surface.
No. Wash and decontaminate the vehicle first. Prep Spray is the final wipe that removes remaining oils, wax residue, and light surface film before protection.
Use it after paint correction or decontamination and immediately before applying a ceramic coating, graphene coating, sealant, or wax.
It is designed for exterior paint, glass, chrome, and wheels. Always work on a cool surface and test first when the material or finish is unfamiliar.
No. Work one small section at a time and wipe before the product dries. This gives you better control and helps prevent streaking.
No. Use it in the shade on cool, dry panels and follow all instructions and safety warnings on the label.
Select your quantity above and check out securely with free U.S. shipping.
Normal washing removes loose dirt, but bonded contamination can remain attached to paint and glass. A properly lubricated clay bar lifts that embedded grit so the surface feels smoother before polishing, sealing, or coating.

Good clay work is controlled and gentle—never dry, rushed, or forced.



Lift embedded grit and airborne contamination that settles into the surface over time.
Remove small bonded particles and stubborn surface film after the vehicle has been washed.
Address rough spots that remain after chemical decontamination and contact washing.

Work in the shade on cool, freshly washed paint. Keep the surface generously lubricated.
Always test an inconspicuous area first. Softer paint may require polishing after any mechanical decontamination.
For well-maintained finishes, soft paint, and light bonded contamination.
For routine decontamination when a light grade does not fully smooth the panel.
For stubborn contamination. Test carefully and expect that follow-up polishing may be appropriate.
Chemical and mechanical decontamination do different jobs. Use only the steps your vehicle needs.
Dissolve metallic fallout before using mechanical clay treatment.
Shop Iron Remover →Lift the bonded contamination still attached to paint or glass.
Remove oils and residue before applying your chosen protection.
Shop Prep Spray →Apply wax, sealant, or a bonded graphene ceramic coating.
Shop Graphene Coating →Clay must glide over the surface on a film of compatible lubricant. Stop if it drags, keep the working face clean, and discard any clay that falls onto the ground.
Add Graphene Shampoo and this Clay Bar Kit to the cart together. The qualifying bundle saving is calculated automatically—no coupon code needed.
After washing, place your hand inside a clean plastic bag and gently feel the paint. A gritty or rough texture indicates bonded contamination may still be present.
Incorrect use can cause marring. Always work on a washed, cool panel with generous lubricant, light pressure, and a clean clay face. Test first, especially on soft or dark paint.
Only when bonded contamination is present. Many vehicles need it seasonally or before polishing and coating, but usage depends on storage, climate, and driving conditions.
Clay can be used on suitable exterior glass and coated wheel surfaces with proper lubrication. Use separate clay for dirtier areas such as wheels and test unfamiliar finishes first.
Inspect the finish. If protection will be applied, use Prep Spray for the final surface wipe, then apply the chosen wax, sealant, or coating.
Choose the complete kit or triple clay pack above.
Keep your selected Clay Bar option and add the products that handle loose dirt and metallic fallout. Your saving is applied automatically in the cart.
Customers notice the difference before they even step back to admire the shine: bonded grit is gone and the surface feels ready for polishing or protection.
“This is the most satisfying step in detailing. Seeing the white clay turn brown lets you know it’s working. My car shines so much brighter now because the surface is truly clean.”
“I have a black BMW 5 Series, so I’m terrified of scratches. I used the Yellow bar with GlideTech spray. Zero marring—it lifted the dirt and left the paint perfect.”
“The spray nozzle was a little hard to twist open, but once it started working, it misted fine. The clay bars are excellent—very pliable once you knead them a bit.”
I love the finish on my black BMW 3 Series. It really deepened the color and hid some very light swirl marks. I’m giving 4 stars because the smell is quite potent—definitely chemical. Make sure you wear the included mask or do it in a well-ventilated area. But the protection is 5 stars.
The kit comes with everything—gloves, sponge, cloths. Very convenient.
I was quoted $1,200 by a local shop to ceramic coat my new Tesla Model Y. I decided to try this kit instead. It took me about 4 hours to do the prep (wash, iron remover, clay) and apply the coating. The result is indistinguishable from a pro job. The gloss is deep and the surface is slick as ice. Saved me a fortune.
This isn’t a simple spray wax, so be prepared to put in a little work, but it’s worth it. I applied it to my 2019 Ford Ranger. You wipe it on with the sponge, wait for it to “flash” (look kind of rainbow-y), and then buff it off. Once it cures, the hardness is real. Branches that used to scratch my paint now just slide over it.
I was worried about streaks, specifically on a black car. But the instructions were clear. Apply to the sponge, spread in a cross-hatch pattern, wait a minute, and buff. As long as you have good lighting, it’s foolproof. No high spots left on my Nissan Altima.