Prepare the paint
Wash, decontaminate and correct defects if needed. Remove polishing oils and let the surface dry.

Water beads on the coated surface, helping dirt rinse away during routine washing.
Water-beading illustration
PRO 10H adds gloss to a well-prepared finish. Correct existing paint defects before coating if needed.
Gloss illustration
Wash and prepare the surface first. Prep products are sold separately.

Cool paint, good lighting and one small section at a time.
Wash, decontaminate and correct defects if needed. Remove polishing oils and let the surface dry.
Use the applicator to spread the coating evenly over a small section.
Follow the supplied flash time. Wipe away excess with the towel and check from different angles.
Keep the vehicle dry for 24 hours after the final coat, and wait 7 days before washing.
Adding a second layer? Allow 2–4 hours between coats. Coating does not remove scratches or replace paint correction.

Each kit contains a 50 mL bottle and application accessories. Choose additional kits for multiple vehicles or projects. The amount required depends on the surfaces, vehicle size and number of layers.
Yes, with thorough preparation, good lighting and time to work in small sections. Read the supplied instructions first and plan a dry curing period.
No. Inspect and correct paint defects before coating if needed. Ceramic coating does not make paint scratch-proof or prevent impact damage.
The surface must be clean and free of polishing oils or residue. Prep Spray is an optional add-on and does not replace washing or decontamination.
Follow the application instructions and test an inconspicuous area first. For an unfamiliar finish or material, ask our product support team before application.
I love the finish on my black BMW 3 Series. It really deepened the color and hid some very light swirl marks. I’m giving 4 stars because the smell is quite potent—definitely chemical. Make sure you wear the included mask or do it in a well-ventilated area. But the protection is 5 stars.
The kit comes with everything—gloves, sponge, cloths. Very convenient.
I was quoted $1,200 by a local shop to ceramic coat my new Tesla Model Y. I decided to try this kit instead. It took me about 4 hours to do the prep (wash, iron remover, clay) and apply the coating. The result is indistinguishable from a pro job. The gloss is deep and the surface is slick as ice. Saved me a fortune.
This isn’t a simple spray wax, so be prepared to put in a little work, but it’s worth it. I applied it to my 2019 Ford Ranger. You wipe it on with the sponge, wait for it to “flash” (look kind of rainbow-y), and then buff it off. Once it cures, the hardness is real. Branches that used to scratch my paint now just slide over it.
I was worried about streaks, specifically on a black car. But the instructions were clear. Apply to the sponge, spread in a cross-hatch pattern, wait a minute, and buff. As long as you have good lighting, it’s foolproof. No high spots left on my Nissan Altima.